TIMESTAMPS: 00:50 → Connecting a DC Master 04:46 → Adding a Digital Output channel 08:53 → Using Digital Outputs in behaviours

TIMESTAMPS: 00:50 → Connecting a DC Master 04:46 → Adding a Digital Output channel 08:53 → Using Digital Outputs in behaviours

Digital Output channels are used to turn on or off power to a device. They can be used with either the **Digital Master,** the **DC Master** or the **Sensor Master.**

You are able to change the status of the output as part of your Update channel actions in Behaviours.

Adding

1. In Channels click Add channel and select Digital Output.
2. Enter a name that you would like to call it.
3. You will be presented with the channel view.

Current value

• Shows the current state of the channel (the box will appear GREY when the channel is OFF, and will turn GREEN when the channel is ON).
• You can manipulate this toggle to change the output.
• This value will show the current status of the virtual channel (when testing) or physical channel when patched to hardware.

Settings